This miniature baseball cap keychain is a small amigurumi-style project with a structured brim and a hanging loop worked into the magic ring, so no extra sewing is needed to attach it. It is an easy pattern that comes together in under an hour, and the finished cap measures about 2 inches across the brim and 1.5 inches tall. It suits a bag charm or a handmade gift.
At a glance
| Skill Level | Easy |
|---|---|
| Finished Size | Approximately 2 inches in diameter across the brim, and 1.5 inches tall. |
| Gauge | 6 sts and 6 rounds = 1 inch (exact gauge is not critical, but stitches should be tight enough that the hat holds its shape). |
Build summary
This miniature baseball cap is constructed in three main phases to achieve its realistic shape. First, you will work the domed crown from the top down in continuous rounds. Right at the very beginning inside the magic ring, you will create a small chain loop that serves as the anchor point for your keychain hardware—a brilliant trick that saves you from sewing a flimsy loop on later! As you work your way down the crown, you will create a small chain space to form the classic “snapback” opening at the back of the hat. Once the main dome is fastened off, you will rejoin your yarn to the front to create the brim. The brim is worked back and forth in rows, utilizing the front loops only (FLO) on the first row to force the brim to project outward at a sharp, realistic angle. Finally, you will finish up with some simple, straight-stitch embroidery for the logo and attach your metal hardware.
Materials
- Yarn: Medium-weight (Category 4) matte cotton yarn. You will need approximately 15-20 yards of the main color (Pastel Blue) and a 12-inch scrap of contrasting color (Bright White) for the embroidered letter.
- Hook: 3.5mm (Size E) crochet hook (or size needed to achieve a tight fabric).
- Notions: Tapestry needle / yarn needle for weaving in ends and embroidering.
- Hardware: One silver metal keychain assembly with a split ring.
- Extras: A stitch marker to keep track of your continuous rounds.
Abbreviations (US terms):
- ch = chain
- sc = single crochet
- inc = increase (2 sc in the same stitch)
- dec = decrease (single crochet 2 stitches together)
- sl st = slip stitch
- rnd(s) = round(s)
- st(s) = stitch(es)
- FLO = front loops only
The pattern
Top Crown and Hanging Loop
Start the crown at the top, working in continuous rounds. Create a magic ring. Rnd 1: Ch 4 (this forms the hanging loop for the hardware later), slip stitch into the magic ring, then crochet 6 sc into the ring. Pull tight. (6 sc, 1 loop). Rnd 2: 2 sc in each stitch around, pushing the loop to the right side of the work. (12 sc). Rnd 3: [1 sc, inc] 6 times. (18 sc). Rnd 4: [2 sc, inc] 6 times. (24 sc). Place a stitch marker to track your rounds.

Lower Crown and Snapback Arch
Build the height of the hat and create the snapback arch opening at the back. Rnd 5: [3 sc, inc] 6 times. (30 sc). Rnds 6-8: sc in each st around. (30 sc). Rnd 9 (Creating the arch): sc 24, ch 4, skip the next 4 sts, sc 2. (26 sc, 4 chs). Rnd 10: sc 24, work 4 sc over the ch-4 space to reinforce the arch, sc 2. (30 sc). Slip stitch in the next stitch and fasten off, weaving in the end to leave a clean, flat bottom edge.

Crocheting the Brim
Join the pastel blue yarn to the front of the hat, skipping 9 stitches from the back arch to center the brim. Row 1: Working in the front loops only (FLO) to make the brim project outward, sc in the next 12 sts. Ch 1, turn. (12 sc). Row 2: dec, sc 8, dec. Ch 1, turn. (10 sc). Row 3: dec, sc 6, dec. Ch 1, turn. (8 sc). Row 4: dec, sc 4, dec. (6 sc). Fasten off and weave in all loose ends on the inside of the cap.

Embroidering the Initial
Thread a tapestry needle with a 12-inch length of white medium-weight cotton yarn. Center your work on the front of the dome, directly above the middle of the brim. Sew a capital letter ‘A’ using three simple straight stitches: two long angled stitches for the sides of the letter and one horizontal stitch across the middle. Tie the yarn tails off securely inside the hollow crown and trim the excess.

Attaching the Keychain Ring
Take your silver metal split ring and keychain assembly. Carefully pry open the split ring (using your thumbnail or small pliers) and thread it completely through the small ch-4 loop you created in Round 1 at the top of the cap. Twist the ring until the yarn loop is securely inside. Ensure the chain hangs evenly and the charm is ready to use.

Working at miniature scale
At this size, one extra or missing stitch changes the shape of the cap, so count your stitches at the end of every round. Keep your tension tight, as the gauge note says, so the crown holds its dome. The hanging loop is made inside the magic ring at the start, so you do not need to sew a loop on later; leave enough chain to fit your keychain hardware.
The tight amigurumi stitches and the front-loop-only brim help the cap keep its domed shape. Once you know the construction, you can make more in different colors, for example a set in the colors of a favorite team. Questions about the pattern? Send them through the contact page.
Note: The images in this post are AI-generated illustrations, not photos of finished items.
