The Crimson Macramé Statement Bag is a structured, deep red handbag that combines traditional crochet with sculptural macramé-style embellishments. This project yields a sturdy, eye-catching accessory featuring an asymmetrical body—one side worked in a dense fabric and the other in an airy mesh. The exterior is decorated with thick cord manipulated into large leaf and wave appliqués, adding dimension and a sophisticated texture. A thick front tassel and a rigid wrapped handle with gold hardware accents complete the dramatic look. Because of the split stitch pattern, surface sewing, and hardware assembly, this project is best suited for an intermediate to advanced crocheter looking for a unique, mixed-media challenge.
Before you begin
This is an Intermediate skill level project. The finished bag measures approximately 11 inches wide by 8 inches tall, excluding the handle. Gauge is roughly 10 single crochet stitches and 10 rows equal 4 inches, though exact gauge is not critical as long as the fabric is stiff enough to hold its shape.
What do the abbreviations mean?
ch = chain, sc = single crochet, sl st = slip stitch, dc = double crochet, sk = skip, st/sts = stitch/stitches, rnd/rnds = round/rounds.
Materials list
- Super bulky t-shirt yarn (Crimson): approx 150 yards
- Thick macramé cord (Crimson): approx 50 yards
- Crochet hook (Size K/6.5mm or size needed for stiff gauge)
- Gold hardware: 1 closure ring, 2 large attachment rings, 1 large cylindrical tassel cap, small cylindrical cord end caps
- Arched plastic or wire bag handle core
- Heavy-duty yarn needle, sewing pins and 2 stitch markers
- Craft glue or crimping pliers
- 8-inch piece of cardboard for tassel making
The plan
We begin by crocheting a sturdy oval base, working up the sides in an asymmetrical split pattern of solid single crochet and open filet mesh. Next, we cut lengths of crimson cord, pin them into sweeping leaf and wave shapes over the bag body, and whipstitch them securely from the inside. We then crochet a center closure flap, assemble a thick front tassel with a gold cap, and tightly wrap a rigid bag handle core with cord to create a ribbed finish. Finally, we join the flap, tassel, and handle to the bag body and finish the decorative side cords with gold end caps.
Work through it
Part 1: Crocheting the Oval Base
Ch 20. Sc in the 2nd ch from the hook and in the next 17 chs (18 sc), work 3 sc in the last ch, then sc in the 19 remaining loops along the opposite side of the foundation chain. Join with sl st to the first sc (40 sts). Place a stitch marker in the first stitch of the round and move it up every round. Rounds 2 to 5: sc in each st around, working 2 sc in the middle st of each rounded end, which adds 2 sts per round. After round 5 you have 48 sts and a flat oval about 8 inches long. Keep the stitches tight so the base stays rigid.
Part 2: Turning the Sides Up
Round 6: sc in the back loop only of every st around (48 sts). This leaves a clean ridge and makes the fabric fold upward to form the walls of the bag. Round 7 (set-up for the split pattern): sc in the next 24 sts for the solid side. For the mesh side, *sc in the next st, ch 1, sk 1*, repeat 12 times. Join with sl st (24 sc plus 12 sc and 12 ch-1 spaces). Mark where the solid side ends and the mesh side begins with a second marker, because the two halves must stay lined up on every round.
Part 3: Working the Split Body
Rounds 8 to 21 (14 rounds, so the split pattern is 15 rounds including round 7): sc in each of the 24 solid sts, then on the mesh side sc in each sc and ch 1 over each ch-1 space of the previous round, 12 times. Join and continue. The mesh side stacks into a grid of small squares while the solid side builds dense fabric. Round 22: sc in every st and in every ch-1 space around (48 sts) to even out the top edge. Fasten off and weave in the yarn tail. The bag should now stand up by itself.
Round-by-round stitch counts
| Round | What you work | Stitches at end |
|---|---|---|
| 1 | Oval from a ch 20 foundation | 40 |
| 2 to 5 | Sc around, 2 sc in the middle st of each end | 42, 44, 46, 48 |
| 6 | Sc in back loops only | 48 |
| 7 to 21 | 24 solid sc, 12 mesh repeats of sc and ch 1 | 48 (counting each ch-1 space) |
| 22 | Sc in every st and ch-1 space | 48 |

Part 4: Making and Sewing the Leaf Appliqués
Cut several lengths of thick crimson cord, about 24 inches each. Bend each length into a long, pointed leaf outline, crossing the ends at the base of the leaf. Lay the leaves out on the solid side so they sweep upward and slightly overlap, and pin them down. Check the layout from a few feet away before sewing anything.
Part 5: Adding the Wave Lines
Pin 3 or 4 longer curved lengths of cord across the mesh side to make raised waves, letting them follow the grid. Whipstitch both the leaves and the waves in place from the inside of the bag, catching only the back fibers of the thick cord so no stitches show on the front. Leave the cord ends hanging loose along the side edge; they get end caps in the last step.

Part 6: Crocheting the Closure Flap
Ch 7, sc in the 2nd ch from the hook and across (6 sc). Ch 1, turn, sc across, and repeat for 16 rows total. On the final row, loop the edge around a gold closure ring and sc across to secure it, then fasten off and leave a long tail for sewing.
Part 7: Making the Front Tassel
Wrap crimson cord 50 times around an 8-inch piece of cardboard. Slide a short length of cord under the loops at the top and tie it tightly. Cut the loops at the bottom edge, remove the cardboard, and trim the ends so they are even. Glue a large gold cylindrical cap firmly over the tied top and let it dry completely.

Part 8: Wrapping the Rigid Handle
Tie the crimson cord to one end of an arched plastic or wire handle core, close to the attachment point. Wrap or macramé-knot the cord tightly around the entire length, pushing each wrap against the last to create an even ribbed texture. Make sure no part of the core shows. Finish both ends by securing the cord around two large gold rings.

Part 9: Attaching the Flap and Tassel
Sew the back edge of the flap to the top back rim of the bag body with the yarn tail so it folds over the front. Hang the gold-capped tassel from the flap’s closure ring, and check that the flap lies flat and the tassel hangs straight down the front.
Part 10: Attaching the Handle and Finishing
Sew the gold rings at the base of the handle firmly to the top left and right corners of the bag opening, going through the ring several times. Trim the loose side cords to uniform lengths and attach the small gold cylindrical end caps with craft glue or crimping pliers. Check that everything is tight before use.

Constructing the Crimson Macramé Statement Bag
To adjust the size of the bag, alter the initial starting chain of the oval base. Add chains for a wider bag, ensuring you maintain an even number to keep the asymmetrical mesh and solid sections balanced, and work additional rounds before finishing the top edge for extra height. The easiest mistake to make when attaching the surface appliqués is sewing through to the front of the cord, which disrupts the smooth, structural appearance of the sweeping leaves and waves. Keep the whipstitches strictly on the inside of the bag, catching only the back fibers of the thick cord. When creating the ribbed handle, maintain high tension while wrapping or knotting to prevent the cord from slipping and exposing the rigid core beneath.
A safety note for this project: the small gold cylindrical end caps and the heavy metal tassel cap pose a choking hazard for young children. Ensure they are secured tightly with industrial craft glue or firmly crimped with pliers, and routinely check the hardware for looseness if the bag is used frequently.
Questions about the pattern? Send them through the contact page.
Note: The images in this post are AI-generated illustrations, not photos of finished items.
