This amigurumi snowman is made from two stuffed spheres, a large body and a smaller head, finished with a black top hat tied with twine, an orange carrot nose, black eyes and a deep red fringed scarf. It is worked in chunky white yarn and stands about 11 inches (28 cm) tall including the hat. You need to be able to crochet in the round, increase, decrease and stuff, so it suits easy to advanced beginner level.
Quick facts
| Skill Level | Easy / Advanced Beginner (crochet in the round, increases, decreases, stuffing). |
|---|---|
| Finished Size | About 11 inches (28 cm) tall including the hat, and about 6 inches (15 cm) wide at the base. Size varies with your yarn and tension. |
| Gauge | Not critical, but work tightly so the stuffing does not show through. About 3 sc = 1 inch with the recommended yarn and hook. |
How this project comes together
The snowman is worked in continuous spiral rounds, with no joining and no turning chains. The body and the head are each made from a magic ring, increased into a sphere, and decreased closed around the stuffing. The head is then sewn on top of the body. The black top hat is crocheted separately in the round, using back loops to create a sharp top edge and front loops for a neat brim. The deep red scarf is a simple double-crochet strip finished with yarn fringe, and the tiny carrot nose is a short cone. Finally, we bring our frosty friend to life with the face, the coal buttons and the scarf.
What to gather
- Chunky weight (Category 5) yarn in Bright White (approx. 100 yards), Black (approx. 20 yards), Deep Red (approx. 25 yards), and Orange (a small scrap for the nose).
- Size H (5.0 mm) crochet hook. Use a hook size that gives a firm fabric.
- Polyester fiberfill stuffing.
- Two small black safety eyes (10 mm) or black beads, or black yarn to embroider the eyes. For small children, embroider the eyes and buttons.
- A small piece of natural twine (for the hat bow).
- Black yarn or embroidery thread for the coal buttons.
- Tapestry needle / yarn needle for sewing and embroidery.
- Stitch markers.
- Scissors.
Instructions
1. Crochet the Body
Using bright white yarn, make a magic ring. Rnd 1: 6 sc in ring (6 sts). Rnd 2: inc in each st (12 sts). Rnd 3: *sc 1, inc*, repeat (18 sts). Rnd 4: *sc 2, inc*, repeat (24 sts). Rnd 5: *sc 3, inc*, repeat (30 sts). Rnd 6: *sc 4, inc*, repeat (36 sts). Rnd 7: *sc 5, inc*, repeat (42 sts). Rnd 8: *sc 6, inc*, repeat (48 sts). Rnd 9: *sc 7, inc*, repeat (54 sts). Rnds 10-19: sc in each st around (54 sts). Rnd 20: *sc 7, dec*, repeat (48 sts). Rnd 21: *sc 6, dec*, repeat (42 sts). Rnd 22: *sc 5, dec*, repeat (36 sts). Start stuffing the body firmly now, and keep adding stuffing as you decrease. Rnd 23: *sc 4, dec*, repeat (30 sts). Rnd 24: *sc 3, dec*, repeat (24 sts). Rnd 25: *sc 2, dec*, repeat (18 sts). Rnd 26: *sc 1, dec*, repeat (12 sts). Add the last stuffing. Rnd 27: dec 6 times (6 sts). Fasten off, close the hole with the tapestry needle and weave in the end.

2. Crochet the Head
Using bright white yarn, make a magic ring. Rnd 1: 6 sc in ring (6 sts). Rnd 2: inc in each st (12 sts). Rnd 3: *sc 1, inc*, repeat (18 sts). Rnd 4: *sc 2, inc*, repeat (24 sts). Rnd 5: *sc 3, inc*, repeat (30 sts). Rnd 6: *sc 4, inc*, repeat (36 sts). Rnds 7-12: sc in each st around (36 sts). If you are using safety eyes, insert them between Rnds 9 and 10, about 5 stitches apart, before you close the head. Rnd 13: *sc 4, dec*, repeat (30 sts). Rnd 14: *sc 3, dec*, repeat (24 sts). Rnd 15: *sc 2, dec*, repeat (18 sts). Stuff the head firmly. Rnd 16: *sc 1, dec*, repeat (12 sts). Rnd 17: dec 6 times (6 sts). Fasten off, leaving a long tail. Close the hole and weave in the end, leaving the long tail for sewing the head to the body.

3. Crochet the Top Hat
Using black yarn, make a magic ring. Rnd 1: 6 sc in ring (6 sts). Rnd 2: inc in each st (12 sts). Rnd 3: *sc 1, inc*, repeat (18 sts). Rnd 4: *sc 2, inc*, repeat (24 sts). Rnd 5: In back loops only (BLO), sc in each st around (24 sts) to create the flat top edge. Rnds 6-10: sc in each st around (24 sts). Rnd 11: In front loops only (FLO), *sc 3, inc*, repeat around (30 sts). Rnd 12: *sc 4, inc*, repeat around (36 sts). Rnd 13: *sc 5, inc*, repeat around (42 sts). Fasten off, leaving a long tail for sewing.

4. Crochet the Scarf and Nose
For the scarf: Using deep red yarn, ch 60. Row 1: dc in 3rd ch from hook and in each ch across (58 sts). Fasten off. Cut 4-inch lengths of red yarn and attach them as fringe to both short ends. For the nose: Using orange yarn, make a magic ring. Rnd 1: 4 sc in ring (4 sts). Rnds 2-3: sc in each st around (4 sts). Fasten off, leaving a tail for sewing.

5. Assemble and Add the Details
Pin the head on top of the body, centered, and sew it on securely with the long white tail. Place the hat on the head, tilted slightly, and sew it on with the black tail. Tie a strand of natural twine around the base of the hat, finishing with a small bow. Use the orange tail to sew the cone nose horizontally onto the center of the face, between the eyes. If you did not use safety eyes, embroider two small black eyes with black yarn. With black yarn or thick embroidery thread, make three small coal buttons down the front of the body (French knots, or small straight stitches). Finally, wrap the red scarf once around the neck, where the head meets the body, tie it loosely at the front, and let the fringed ends hang down.

Once the head, hat, nose and scarf are attached, the snowman is complete. You can change the scarf color to match your holiday decor, add a small button to the scarf, or make more than one. Questions about the pattern? Send them through the contact page.
Safety eyes and small children
The pattern allows three kinds of eyes: safety eyes, beads, or embroidered yarn. If the snowman is for a young child, choose embroidered eyes and buttons, as the materials list advises, because anything attached can come loose. Work tightly and stuff firmly so the white stuffing does not show through the stitches.
Stitch abbreviations
ch = chain, sl st = slip stitch, sc = single crochet, dc = double crochet, inc = increase (2 sc in one st), dec = decrease (sc 2 together), BLO = back loops only, FLO = front loops only, rnd = round, st(s) = stitch(es).
Note: The images in this post are AI-generated illustrations, not photos of finished items.
